The VD810 digital readout unit is supplied for connection to LE602, LE702, LE801 and LE901 digital electronic levels.

This graphic display makes it possible to read the inclination values of one or more levels, also in differential mode. The unit also allows communication with the level to set general parameters, including the unit of measurement; it also makes it possible to perform zeroing operations, manage the internal memory and carry out measurement campaigns by confirming value acquisition from the pendulum unit, without touching the instrument. It is supplied with battery charger, wrist strap and user manual.

A single remote control device
The VD810 readout unit houses the 3.5” TFT display, membrane keypad, on/off switch and USB connector for PC connection and battery charger. The pendulum unit communicates with the readout unit up to a distance of 100 metres, without obstacles. The readout unit can manage and display the signal from 4 pendulum units simultaneously. The inclination value is shown on the digital display, as well as the inclination direction; these data can then be stored by the instrument and transferred, even at a later time, to a PC via Microplan® WPLAN Software with four modes: Straightness, sequential; Simple grid flatness; Complete grid flatness; Parallelism. The readout unit allows various operating parameters to be modified, such as: unit of measurement, μm/m, arcseconds, microradians; zero adjustment, simple and absolute; switch-off time; language selection. The instrument is equipped with rechargeable batteries with charge status indication and allows differential operation of 2 pendulum units. The resolution is 0.5 μm/m.